Download

ELVARO

Download the Brochure

 

 

elvaro flyer

THE LATEST SOLUTION IN SPACE SAVING POTABLE WATER PRESSURE BOOSTING

The Elvaro T is a combined tank and variable speed pump set solution designed to maximise the water storage available within a minimum available space.

Variable speed operation of the pumps means system pipework lasts longer due to the removal of the water hammer common on fixed speed operated pumps. This also provides a reduction in energy consumption and is much quieter when in operation.

The compact design of the unit not only provides a spacesaving solution, but is an ideal replacement for an existing installation. Smaller units in the range can fit through standard doorways without having to be dismantled.

elvaro-logo-w

Instant Pressure - ‘plug and pump’

A standard factory configuration, meaning the system is ready to provide a constant water pressure as soon as it is put into operation. Full WRAS approval of pump set in process.
elvaro-logo-w

Ease of Operation

The system is operated directly from the pump VSDs (Variable Speed Drives) mounted above the tank. Adjustment can be made to the control features from the VSDs if required.

Intelligent Variable Speed Control
In situations of high or low demand, the pumps automatically cycle on/off or ramp up/down which will save on energy costs and deliver optimum performance levels at all times.

elvaro-logo-w

Speedy Delivery

 
Available on most standard models within the range.
elvaro-logo-w

Intelligent Variable Speed Control

Intelligent Variable Speed Control In situations of high or low demand, the pumps automatically cycle on/off or ramp up/down which will save on energy costs and deliver optimum performance levels at all times.

Technical Information

A look at the Elvaro T in more detail

Product range 1-3 pumps
Operation duty, duty/standby, duty/assist, duty/assist/standby, duty/assist/assist
Flow range 1.2 – 8.0 litres/sec
Pressure range 2.5 – 6.0 bar
Max system pressure 10 bar
Max system temperature 23oC
Manifold Stainless steel
AISI 304
Pumps  Stainless steel
AISI 304
Tank GRP with insulation (WRAS approved)

 

GRP Insulated Tank
WRAS approved with 25mm insulation with a sealed lid. Nominal Capacity from 500litres to 2250litres. Standard CAT 4 (Type AF) air gap with CAT 5 (Type AB) available on larger tanks.
Discharge
Stainless steel manifold c/w pressure vessel, pump and pressure vessel isolating valves and pump NRVs terminating in male threaded connection. 11/4inch BSP on single, 11/2inch on twin, 2inch on triple pump sets.

Pumps

Submersible pumps constructed from AISI 304 stainless steel. The flow range is 1.0 to 5.0litres/sec. The pressure range is 2.0 to 6.0bar

Controls

Variable speed drives fitted on support plates above the tank configured to control the pump/pumps with an adjustable set point to provide a constant discharge pressure with automatic duty/standby or duty/assist operation. A float switch provides a low level protection. A common volt free alarm system is provided.
Power Supply: 240v/1ph/50Hz standard, with 415v/3ph/50Hz option available