GRP Sectional Water Tanks
Our fully certified large-scale GRP sectional water storage tanks can hold up to 2,000,000 litres!
Industrial GRP Sectional Water Storage Tanks
Industrial GRP Sectional Water Storage Tanks are an ideal solution for the storage of large volumes of water and for applications where access is restricted. These sectional tanks are manufactured to specific applications in GRP panel format and are site assembled.
Tricel Lanark is a well-established supplier of industrial GRP sectional tanks with a proven track record in completing projects of excellent quality. With over 55 years in business we have the production and personnel resources necessary to meet the requirements that each project demands. Our large scale sectional water storage tanks hold up to 2,000,000 litres and have been installed all over the world.
Contact our sales team with any queries you may have and we will be happy to quote your project and give our expert advice on the type of sectional water tank that would best suit your requirements. We manufacture four types of sectional tanks using both “hot press” and “hand laid” production methods. Each tank design may be manufactured with un-insulated panels and insulated panels. We offer free site surveys to our customers subject to location. For more information contact us today.
Features and benefits
✓ Designed to BS EN 13280 (2001)
✓ Twin Compartment options available
✓ Improved resistance to bacterial growth
✓ UV stabilised materials
✓ Low maintenance, resists wind and snow loadings
✓ HCFC & CFC free insulation (38mm & 50mm)
✓ WRAS Approved
Types of GRP Sectional Tanks
Externally Flanged Base (EFB) Sectional Tank
Internally Flanged Base (IFB) Sectional Tank
- EXTERNALLY FLANGED BASE
This sectional water tank is designed for building on raised supports to give access to joints and connections below.
A combination of primary support piers with steel beams may be required to allow adequate access.
Fully draining bases with sump panels are available on request.
- INTERNALLY FLANGED BASE
Suitable for building on a perfectly flat plinth or on a set of levelled steel beams at specified centres.
Sectional Water Storage Tank Clearance Requirements
Range of Sectional Water Tank Panel Sizes
Tank panels are available in metric panels. There are no restrictions to the length and width available. Metric tanks are available to a height of 4m.
Metric sizes
1m x 1m 1m x 0.5m 0.5m x 0.5m
- INTERNALLY FLANGED (I.F.)
This tank utilises Hot Press Moulded panels and is suitable where there is insufficient room to build a tank with externally flanged sides. Most of the joint flanges are internal.
- TOTALLY INTERNALLY FLANGED – TIF TANKS
Specially designed 3D panels are bolted together with all the joint flanges internal. This enables the tank to be built hard against walls on up to 3 sides utilising space that would be too small for conventional sectional tanks.
Sectional Tank Flange Types
EFB: Externally flanged base tanks
Designed for positioning on raised tank supports to permit access to joints and connections below the tank, this design of tank is typically used to provide a positive head of pressure to an adjacent pump or related equipment. Specifically manufactured for areas where there are no space restrictions. All flanges and fasteners are available on the outside of the sectional tank. The benefits of this tank include the option to fully drain the tank of water without the need for pumps, it is also easier to maintain due to all connections are accessible from the outside of the tank.
IFB: Internally flanged base tanks
These sectional tanks are designed and manufactured for positioning on a flat foundation or leveled steel beams as per our foundation requirements. Ideally suited for areas where height or headroom is restricted. All flanges and fasteners are located within the tank. With this design the tank cannot be fully drained without the use of a pump. The tank is constructed and fastened from the inside and the base needs to be level and able to support the tank without movement. The fixtures are only available from the inside, allowing for extra headroom as access to base panels is not required.
TIF: Internally flanged tanks
Totally Internally Flanged sectional water tanks are the ideal solution when space or access is limited or a large capacity tank is required. Manufactured & designed for your exact site requirements. Most of the joint flanges and fasteners are internal, requiring less room space for tank assembly.
Spacesaver Tanks
Specially designed 3D panels that are bolted together with all internal flanges. This enables the tank to be positioned and assembled against 3 walls or in restricted applications where space is not available on the external perimeter of the tank.
IFB: Internally flanged base tanks
ST: Spacesaver tanks
Base supports
EFB: Externally Flange Base supported on Piers with Spanning Steels
EFB: Externally Flange Base Supported on Piers
SDB: Self Draining Base supported on Piers with Levelling Stells
IFB: Internally Flanged Base supported on concrete plint with levelling steels
IFB: Internally Flanged Base Suppport on concrete plinth
Our Sectional Cold Water Storage Case Studies
Site Assessment for Replacement Sectional Water Tank
Company name: CHC Ltd
Product: Site visit, Tank supply & installation – EFB Sectional Tank with a packaged variable speed booster set
Tank dimensions & capacity: 2m x 1m x 1.5m, 3,000 litre water tank installation
Supply & Installation of a Sectional Water Tank
Company name: Cairn Lodge Hotel
Product: Sectional water storage tank, pump set & enclosure
Tank dimensions & capacity: 2m x 1m x 1.5m, 3,000 litre water tank installation
Manufacture, Delivery & Installation of Sectional Tanks
Company name: University Hospital Cross House, Scotland
Product: Two sectional cold water tanks
Tank dimensions & capacity: Tank 1: 12m x 9m x 2m | Tank 2: (216,000 Litres Nominal capacity)
Tanks Insulation – Uses
Uninsulated Water Tanks
Insulated Water Tanks
Insulated Water Tanks are supplied with suitable connections in compliance with WRAS for storage of potable water. Potable storage water is water that has been certified safe for human consumption, these types of tanks are used in commercial and domestic applications. Insulated attic tank for homeowners, insulated sectional tanks for larger volumes of water required in hotels, restaurants, creches, theatre, etc.
Sectional Tank Options
Internal steelwork and fasteners are stainless steel A4 grade as standard.
Tank divider (partition) to allow continuity of supply during maintenance.
Sump base panels to facilitate draining.
Raised inlet valve chamber (Ball valve Box).
Screened spill slot to provide Type AB air gap
– normally fitted to raised chamber.
Side mounted access hatch. Provides safe egress during maintenance
inside the tank.
Our Accreditations
At Nicholson’s, we pride ourselves in manufacturing and installing GRP water tanks of the highest quality throughout the UK. Click to see Our Certifications.
are now supplying
ELVARO
Tank & Booster Set
Water Pressure Solution